Ghost 2 Immobiliser
Ghost is a wireless security system that protects your car against key-cloning and hacking. It is connected to the ECU unit via CAN data networks. It's quiet, so it can't be detected.
It can only be deactivated by pressing a specific button sequence (like PIN code) that you have programmed using the buttons in your car - such as those on the steering wheel or center console.
Protect Your Car from Theft
Car theft is on the rise and vehicles are taken away in a matter of seconds. It is essential that car owners take into consideration the additional security measures they can adopt. An immobiliser is one of the best and most dependable methods of keeping your vehicle safe. Ghost immobilisers are an excellent option since they are small and tucked away in the wires of your vehicle. They also do not emit radio frequency signals. They are therefore untraceable and can be put in without impacting the CAN bus system in your vehicle.
Unlike other immobilisers that rely on tags, keypad input or a specific sequence of keys to disarm them the ghost immobiliser that is located near me can only be disabled with the exact pin code that was set up by us at the time of installation. This unique sequence of disarming uses the buttons that are already within your vehicle, such as those on your steering wheel, doors or central console to stop anyone from starting the engine and driving away your vehicle. This stops thieves from copying your key or using a jamming/spoofing devices that disable the standard immobilisers for cars.
A ghost immobiliser will not just stop your car from being driven but also stops it from being smashed to make parts. This is a growing issue in the UK due to the growing popularity of these kinds of cars. It can happen in less than minutes. Ghost immobilisers from TTW are easily programmed to protect your vehicle from these kinds of attacks.
Installing our ghost 2 immobiliser will prevent your vehicle from being stolen at a service station, or even if it is driven into the garage by employees. This is because the Ghost can be put into Service/Valet mode and will only allow a unique sequence of buttons to be input by you, our customers.
If you'd like to know more about our ghost immobilisers, or want to have a free quote, please contact us today. We're happy to assist you and give you peace of mind knowing your vehicle will be safe at all time.
There isn't a key fob or LED to indicate its whereabouts
This car immobiliser that is not detectable integrates with your cars CAN network to guard your vehicle from the most recent kind of car theft. In contrast to other CAN immobilisers that are sold by aftermarket, Ghost does not rely on key fobs or LED indicators to function instead it makes use of buttons found in the standard factory controls that are already within your vehicle like those on the steering wheel, door panels and centre console. This creates a code that must be entered to start your vehicle, which makes it untraceable for thieves.
The developers of the CAN-BUS immobiliser have added additional security methods in to prevent the device from being breached or hacked. It also offers CANBUS blocking and physical immobiliser cuts, meaning that even when you lose your keys, the thief won't be able to steal your car with your joy and pride.
Installing the CAN-BUS in your vehicle is a straightforward and fast procedure that takes just 30 minutes. We will send one of our staff in your area to set up the time and place that suits you. After your vehicle has been equipped, you will receive a registration number and unique security codes for your phone and the app to make it simple to use and ensure that you are always in charge of your car's security.
The system is compatible with the majority of modern vehicles, but If you own a classic or specialized vehicle Contact us to determine compatibility. The price for installation and supply of The Ghost Immobiliser 2 is APS449 and your vehicle will be added to the International Security Register if fitted by one of our approved fitters. Do not be afraid to contact our helpful team with any questions. We're looking forward hearing from you soon.
Easy to set up and program.
Modern vehicles are often equipped with immobilisers to prevent thieves from hot-wiring or stealing your car. Immobilisers are more effective than physical deterrents like steering wheel locks and wheel clamps since they are built into the vehicle.
The system is directly connected to the CAN data network of your vehicle. It will stop it from running until you enter a unique code. The unit is small and sealed, which means it can be put in any place within your vehicle without any additional wiring. It also doesn't emit any radio frequency signals so it cannot be detected by RF scanners or code grabbing equipment that is used by thieves.
Ghost uses your vehicle's existing buttons on the steering wheel, door panels and centre console to create a customisable disarm sequence (like the PIN code) which must be entered to authorise startup of your vehicle. The pin code sequence is based on four to 21 button presses and is easily changeable when required. You can also put your vehicle into Service/Valet mode so that it is able to be operated but the vehicle is not able to start or drive. This will ensure your car is safe when you bring it in for service or valet parking. Also, make sure that the mechanic isn't able to access your pin code to disable your system.
You can make use of our app to create an interim pin for your ghost device if you plan to be away from your car for a prolonged period of time such as an extended work or holiday. You can also enter your pin code manually whenever you want to drive the vehicle.
Our CAN bus immobiliser can also be compatible with a remote keyfob or tracker. (Brand dependent) This gives priority to the ghost system. This is a great option for additional security in the case your vehicle is stolen, or if you lose your keys.
If you're looking for a method to safeguard your vehicle from key cloning and hacking contact us today to see how we can assist. We provide our services all over the UK and also at our own installation centre in Derby.
Service/Valet mode
Modern vehicles have sophisticated eco systems with stop/start that require the right inputs to function effectively. For instance batteries, voltages and temperatures of the engine, as well as external temperatures, and which electrical systems are in operation. Sometimes these can cause problems and can often be difficult to determine if it is Ghost related or not. This is particularly the case if your car has been recently repaired or valet-parked. If this is the case, you can enter the ghost mode which allows the vehicle to start and drive without the need for a pin. This is useful when your car's being serviced by an independent garage or valet-parked.
Press the button for service five times to enter service mode. The indication signal will flash twice to indicate that the service mode has been activated. You can exit the mode at any point by entering a PIN code. After you exited the service mode, the Ghost immobiliser will return to normal operation.
It is a discrete system that communicates with the vehicle ECU through the CAN data circuit. It is directly connected to the original buttons of the vehicle and does not rely on radio frequency signals like other immobilisers. This makes it virtually impossible for any other device to hack or bypass - even jamming devices that use spoof codes to mimic the original key fob are not a problem for this system.
It is an TASSA verified anti-theft system that meets the highest standards of security. This includes an exclusive vehicle marking system linking to the international security register which is an insurance company requirement.
The ghost immobiliser has a very compact form factor and can be easily concealed within the wiring of your vehicle's factory and is nearly impossible for thieves to find. The unit that is sealed is so small that it can be positioned in many areas of the car, such as under dashboards or on steering wheels.
The system makes use of the buttons you have within your vehicle (such as those on your steering wheel doors, door panels or the centre console) to allow you to make an individual and programmable disarm sequence up to 20 presses in length that must be entered before your vehicle starts. ghost immobiliser installation is able to be entered by anyone who has your unique pin code - it's safe and secure for you and your family, friends or work colleagues to use.